No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Non-awakening Port

(Optional) Configuring a Non-awakening Port


Ports are classified into awakening ports and non-awakening ports. Once an awakening port detects a user, the device in dormancy mode is awakened. You can configure some ports as non-awakening ports so that these ports do not affect device dormancy and awakening.


  1. Run system-view

    The system view is displayed.

  2. Run set power manage non-awaken-port interface { interface-type interface-number [ to interface-type interface-number ] } &<1-10>

    Specified ports are configured as non-awakening ports.

    By default, all ports are awakening ports.

Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 77782

Downloads: 515

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next