No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying Services Configured for ASs

Displaying Services Configured for ASs

After services have been configured for an AS in centralized or independent mode, you can view the configured services using the methods described in Table 4-13.
Table 4-13  Method of displaying services configured for ASs

AS Service Configuration Mode

Method

Centralized mode (batch configuration: services are globally delivered)

  • Run the attach as command to log in to the specified AS to view the services configured for it.
  • Run the display uni-mng profile as name as-name [ interface interface-type interface-number ] command on the parent to view the services configured for the specified AS.

Centralized mode (batch configuration: services are delivered using a template)

Centralized mode (services are directly configured for a single AS)

  • Run the attach as command to log in to the specified AS to view the services configured for it.
  • Run the display_current-configuration command on the parent to view the services configured for the specified AS, because the AS's service configurations are recorded in the configuration file of the parent.

Independent mode

Run the attach as command to log in to the specified AS to view the services configured for it.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 50245

Downloads: 435

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next