No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying the CPU Usage

Displaying the CPU Usage

Context

CPU usage is an important indicator to evaluate device performance. A high CPU usage may cause service faults, for example, Border Gateway Protocol (BGP) route flapping, frequent Virtual Router Redundancy Protocol (VRRP) switchovers, or even user login failures. You can use the following commands to view CPU usage statistics and configurations in real time and verify that the device is running stably.

You can view CPU usage configurations to learn about the CPU usage alarm threshold and CPU usage alarm recovery threshold.

  • When the CPU usage reaches the alarm threshold, the system generates a CPU usage alarm.

  • When the CPU usage falls below the recovery threshold, the system generates a clear alarm.

Procedure

  • Run the display cpu-usage [ slave | slot slot-id ] [ vcpu vcpu ] command to view CPU usage statistics.
  • Run the display cpu-usage history [ 1hour | 24hour | 72hour ] [ slave | slot slot-id ] [ vcpu vcpu-index ] command to view CPU usage statistics within a period.
  • Run the display cpu-usage configuration [ slave | slot slot-id ] command to view CPU usage configurations.

FAQ

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 36918

Downloads: 318

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next