No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Statically Specifying the Interface Status of a Clock Device

(Optional) Statically Specifying the Interface Status of a Clock Device

Context

In a PTP clock synchronization network, all clock nodes work in the master-slave relationship. By default, the master-slave relationships between clock nodes are calculated through the BMC algorithm. To manually determine the master-slave relationship between clock nodes, specify the clock status of various interfaces excluding the TC interface.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ptp set-port-state enable slot slot-id

    The function to statically specify the interface status is enabled.

  3. Run interface interface-type interface-number

    The view of the interface whose status is to be statically configured is displayed.

  4. Run ptp port-state { slave | passive | master | premaster | listening | faulty | disabled | initializing }

    The interface status is statically specified.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 51129

Downloads: 441

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next