No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Stack Status Change Event Subscription

Stack Status Change Event Subscription

Interface Name

Stack status change event subscription

Application Phase

Subscription phase

API Prototype

result1_value, result2_description = ops.device.subscribe(tag, slot, event)

Description

Parameter

Description

Value

tag

Indicates conditions.

The value is a string of 1 to 12 case-insensitive characters, consists of letters, digits, and underscores (_), and starts with a letter. The value cannot be one of the following: "", None, and, or, andnot. The value cannot contain \0.

slot

Indicates the slot ID.

The value is a character string, such as slot 0.

event

Indicates the stack status change event.

The value is of the enumerated type:

  • PLUGIN: A member switch is added to the stack.

  • PLUGOUT: A member switch exits from the stack.

  • REGISTERED: A member switch is registered in the stack.

  • RESET: A member switch is restarted in the stack.

Return Value

The result1_value and result2_description in the API prototype indicate return values.

The result1_value is the first return value, 0 indicates success, and 1 indicates failure.

The result2_description is the second return value, indicating the failure cause. It is returned only when the first return value is 1.

Usage Description

If multiple simple events are defined using the ops.device.subscribe API in the subscription phase, but the simple events are not combined through the Multi-Condition Combination API, the Python script assistant cannot be configured.

Using the stack status change event subscription, you can monitor events related to the member switch with a specified stack ID in the stack, including registration, addition, removal, and reset of a member switch.

Example

When the member switch with stack ID 2 exits from the stack, you can trigger the corresponding action.

value, descri_str = ops.device.subscribe("stack", "slot 2", "PLUGOUT")
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 43164

Downloads: 366

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next