No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I Determine Whether CPU Usages of the System and Processes Are High?

How Can I Determine Whether CPU Usages of the System and Processes Are High?

System CPU usage is within the normal range if the following conditions are met:
  1. The CPU usage does not exceed 80% when the system runs for a long period.
  2. The CPU usage does not exceed 95% in a short period and does not keep increasing.
  3. No high CPU usage alarm is generated.
In the following scenarios, the system may generate an alarm when the CPU usage spikes and then clear this alarm rapidly. This situation is normal and does not affect the device operation.
  1. The device has just been started.
  2. Information about all optical modules is queried at a time.
  3. Traffic volume increases instantly.

The service volume and processing time can affect the usage of CPU resources. CPU usage is within a normal range as long as the system CPU usage does not exceed 80% and no high CPU usage alarm is generated.

High CPU usage alarms are as follows:
  • Alarm
    ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.14.1 hwCPUUtilizationRising
    ENTITYTRAP/4/ENTITYCPUALARM:OID [oid] CPU utilization exceeded the pre-alarm threshold.(Index=[INTEGER], 
    EntityPhysicalIndex=[INTEGER], PhysicalName=[OCTET], EntityThresholdType=[INTEGER], EntityThresholdValue=[INTEGER], 
    EntityThresholdCurrent=[INTEGER], EntityTrapFaultID=[INTEGER].)
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 44261

Downloads: 372

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next