No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing Patches on an AS

Installing Patches on an AS


In an SVF system, the parent and ASs need to have patches installed separately. The method of installing patches on the parent is the same as that on a standalone device. The following describes only the procedure of installing patches on an AS. For more details, see "Patch Loading to an SVF System" in the Patch Release Notes.

If an AS already has patches installed, delete the previous patch file and then install the new patch file.


  1. Upload the AS patch file to the root directory cfcard:/ or flash:/ of the parent through FTP.
  2. Run move source-filename destination-filename

    The AS patch file is saved to the root directory unimng/ of the parent.

  3. Run system-view

    The system view is displayed.

  4. Run uni-mng

    The uni-mng view is displayed.

  5. Run upgrade { local-ftp-server | local-sftp-server } username username password password

    A local file server is configured.

    By default, no local file server is configured on the parent.

    If no local file server is configured, an AS cannot download patch files from the parent and so cannot have patches installed.

  6. Run as type as-type patch patch

    A patch file to be installed on the AS is configured.

  7. Run return

    Exit from the system view.

  8. Run save

    The configuration is saved.

  9. Run system-view

    The system view is displayed.

  10. Run uni-mng

    The uni-mng view is displayed.

  11. Run upgrade as name as-name

    The patch file is installed on the AS.

Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 86977

Downloads: 523

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next