No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an Encapsulation Mode for G.8275.1 Messages

Configuring an Encapsulation Mode for G.8275.1 Messages


  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run ptp mac-egress destination-mac destination-mac

    The G.8275.1 messages to be sent from the interface are encapsulated in MAC encapsulation mode, and the destination MAC address is configured.

    The available destination MAC addresses are as follows:

    • 011B-1900-0000: forwardable multicast MAC address
    • 0180-C200-000E: unforwardable multicast MAC address

Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 49645

Downloads: 431

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next