No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Running Status of NTP

Monitoring the Running Status of NTP


After NTP configurations are complete, run the following commands in any view to monitor NTP running status.


  • Run the display ntp-service statistics packet [ ipv6 | peer [ ip-address [ vpn-instance vpn-instance-name ] | ipv6 [ ipv6-address [ vpn-instance vpn-instance-name ] ] ] ] command to view statistics on NTP packets or symmetric peers.
  • Run the display ntp-service status command to view the NTP status.
  • Run the display ntp-service sessions [ verbose ] command to view all session information maintained by the local NTP service.
  • Run the display ntp-service trace command to view the path from the local device to the reference clock source.
  • Run the display ntp-service event clock-unsync command to view causes of the last 10 failed clock synchronizations.
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 75774

Downloads: 513

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next