No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Powering Off Member Switches

Powering Off Member Switches

Context

After you complete the preceding configurations, power off all member switches.
NOTE:

The stack configuration is saved automatically. If you want to save other configurations, run the save command to save them before you power off the switches.

Procedure

  1. (Optional) Run the save command to save the configuration.
  2. Power off all the member switches.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 50223

Downloads: 435

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next