No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Information Output

Information Output

Information generated by the device can be output to a remote terminal, console, log buffer, log file, or SNMP agent. To output information in different directions, 10 information channels are defined for the information center. These channels work independently from one another. You can configure output rules so that information is output through different channels in different directions based on information type and severity level. An example is shown in Figure 10-1.

Figure 10-1  Information center

By default, logs, traps, and debugging messages are output through default channels. You can change names of the channels as well as the relationships between channels and output directions as required. For example, you can set the name of channel 6 to user1 and configure channel 6 to send information to the log host. The information sent to the log host is then output through channel 6 instead of the default channel 2.

Table 10-3 lists channel numbers, default channels of information, and descriptions.

Table 10-3  Relationships between default channels and output directions

Channel Number

Default Channel Name

Output Direction

Description

0

console

Console

Outputs logs, traps, and debugging messages to the local console.

1

monitor

Remote terminal

Outputs logs, traps, and debugging messages to a VTY terminal for remote maintenance.

2

loghost

Log host

Outputs logs, debugging messages, and traps. The information is saved to the log host in file format for easy reference.

3

trapbuffer

Trap buffer

Outputs traps.

4

logbuffer

Log buffer

Outputs logs.

5

snmpagent

SNMP agent

Outputs traps.

6

channel6

Unspecified

Reserved. You can specify an output destination for this channel.

7

channel7

Unspecified

Reserved. You can specify an output destination for this channel.

8

channel8

Unspecified

Reserved. You can specify an output destination for this channel.

9

channel9

Logfile

Outputs logs, debugging messages, and traps.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 33807

Downloads: 280

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next