No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Establishing a Stack Through Stack Card Connections

Establishing a Stack Through Stack Card Connections

Carefully review the role and functions of member switches before you establish a stack using stack card connections. You are advised to follow the process in Figure 3-29 to establish a stack.
NOTE:

In Figure 3-29, the three steps in the dashed box are included in Performing Software Configurations. Configuring a stack ID and stack priority are optional but are recommended to facilitate management.

Stack cards do not need to be installed when you use fixed stack ports to establish a stack.

Figure 3-29  Process of using stack card connections to establish a stack
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 34325

Downloads: 287

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next