No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting an AS to the Parent Across a Layer 2 Network

Connecting an AS to the Parent Across a Layer 2 Network


In Figure 4-9, when ASs connect to an SVF system through a Layer 2 network, only level-1 ASs are supported and APs can connect to ASs.

The fabric-port that connects the parent to an AS through a Layer 2 network is called an indirectly connected fabric port. Indirectly connected fabric ports on the parent and fabric ports that connect ASs to an SVF system need to be manually configured. Figure 4-10 illustrates the process of connecting an AS to the parent across a Layer 2 network.

Figure 4-9  Parent is connected to ASs across a layer 2 network

Figure 4-10  Process of connecting an AS to the parent across a Layer 2 network
Configuring the Parent Configuring an AS Configuring Prerequisites for Enabling SVF on the Parent Enabling the SVF Function on the Parent Configuring a Fabric Port (on the Parent) Pre-configuring an AS Name Configuring AS Access Authentication Configuring a Management VLAN and Enabling the Client Mode Configuring a Fabric Port (on an AS)
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 84956

Downloads: 523

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next