Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
S5700EI and S5700SI Stack Card Stacking Support
- For the cables that can be used as stack cables, see "Cables" in the Hardware Description. Using other cables may cause exceptions in the stack system, for example, frequent error-down events on stack ports.
- The number of stacked switches is recommended to be 2 to 5.
Table 3-7 Stack card stacking support
Device Series |
Stacking-supported Port | Stack Cable | Rate of a Single Port | Remarks |
|---|---|---|---|---|
S5700SI |
Two ports on each stack card |
|
12 Gbit/s |
|
S5700EI |
Two ports on each stack card |
|
12 Gbit/s | Any models of the S5700EI series can set up a stack. |