No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting the Timestamp Format of Logs

(Optional) Setting the Timestamp Format of Logs

Context

To adjust the time format and time precision for information output, configure the timestamp.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run info-center timestamp log { { date | format-date | short-date } [ precision-time { second | tenth-second | millisecond } ] | boot } [ without-timezone ]

    The timestamp format of logs is configured.

    By default, the timestamp format of logs is date and logs are accurate to seconds.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 34123

Downloads: 287

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next