Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
S5700HI and S5710HI Service Port Stacking Support
- For the cables that can be used as stack cables, see "Cables" in the Hardware Description. Using other cables may cause exceptions in the stack system, for example, frequent error-down events on stack ports.
- Combo ports cannot function as stack member ports.
- For stacking-supported service ports, some of them can be used as stack ports, whereas some can be used as ordinary service ports.
- The number of stacked switches is recommended to be 2 to 5.
Table 3-9 Service port stacking support
Device Series |
Port Supporting Stacking | Stack Cable | Rate of a Single Port | Remarks |
---|---|---|---|---|
S5700HI |
10GE ports on front cards: The S5700HI supports ES5D00X2SA00 and ES5D00X4SA00 front cards, which support two and four 10GE SFP+ optical ports respectively. |
|
10 Gbit/s |
|
S5710HI | 8*10GE ports on the front panel |
|
10 Gbit/s |
|