No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring Alarms

Monitoring Alarms

Procedure

  • Run display alarm active

    Active alarms are displayed.

  • Run display alarm information [ name alarm-name ]

    The alarm configuration is displayed.

  • Run display alarm history

    The historical alarms are displayed.

  • Run display alarm urgent [ slot slot-id | time interval ]

    The hardware alarms on the device are displayed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 50856

Downloads: 440

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next