No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Monitoring Interfaces

Overview of Monitoring Interfaces

Definition

Monitoring interfaces are designed on a switch supporting a wide temperature range to monitor the switch's components, including the cabinet door, power supply, and backup power supply.

Purpose

The network management system (NMS) remotely monitors access devices based on real-time device level monitoring information of monitoring interfaces.

The S5720I-SI series switches are typically deployed outdoors and not maintained for a long time. If exceptions occur in the external environment of the switch, for example, the cabinet door is opened unexpectedly or the backup power supply is faulty, maintenance personnel cannot detect the fault in a timely manner. To solve this problem, the S5720I-SI series switches provide environment monitoring interfaces. Monitoring interfaces are connected to the cabinet door and backup power supply to monitor the cabinet door status and backup power supply voltage. If the cabinet door or backup power supply becomes abnormal, the switch sends a trap to the NMS, which then remotely monitors the working environment of the switch.

Figure 7-1  Monitoring interface application
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 50494

Downloads: 437

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next