No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Backing Up Electronic Labels

Backing Up Electronic Labels


Information in electronic labels can be useful if you need to troubleshoot a network fault or replace hardware in batches. Therefore, backing up electronic labels is important to improving maintenance efficiency.
  • If a network fault occurs, you can rapidly learn about hardware information using electronic labels, improving hardware maintenance efficiency. In addition, information in electronic labels of faulty hardware enables you to analyze and trace hardware defects.

  • Before replacing hardware in batches, you can obtain accurate hardware deployment information based on information in the electronic labels recorded in the archive systems of customers' devices. This information enables you to evaluate the impact of hardware replacement and define policies to efficiently replace hardware in batches.

Electronic labels can be backed up to a file server or the local flash memory. Before backing up electronic labels to a file server, ensure that the device and file server can communicate. The file server can be an FTP or SFTP server. SFTP is recommended for high-security scenarios because FTP cannot ensure secure file transfer.


  • Run backup elabel [ slot slot-id [ subcard-id ] ]

    Electronic labels are backed up to the flash memory.

  • Run backup elabel ftp ftp-server-address filename username password [ slot slot-id [ subcard-id ] ]

    Electronic labels are backed up to an FTP server.

  • Run backup elabel sftp sftp-server-address filename username password [ slot slot-id [ subcard-id ] ]

    Electronic labels are backed up to an SFTP server.

Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 75509

Downloads: 513

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next