No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Basic NTP Function Configuration

Verifying the Basic NTP Function Configuration

Prerequisites

All basic NTP functions have been configured.

Procedure

  • Run the display ntp-service status command to view the NTP service status.
  • Run the display ntp-service sessions [ verbose ] command to view the NTP session status.
  • Run the display ntp-service trace command to view the path from the local device to the reference clock source.
  • Run the display ntp-service statistics packet [ ipv6 | peer [ ip-address [ vpn-instance vpn-instance-name ] | ipv6 [ ipv6-address [ vpn-instance vpn-instance-name ] ] ] ] command to view statistics about NTP packets or symmetric peers.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 50190

Downloads: 435

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next