Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Basic NTP Function Configuration
Procedure
- Run the display ntp-service status command to view the NTP service status.
- Run the display ntp-service sessions [ verbose ] command to view the NTP session status.
- Run the display ntp-service trace command to view the path from the local device to the reference clock source.
- Run the display ntp-service statistics packet [ ipv6 | peer [ ip-address [ vpn-instance vpn-instance-name ] | ipv6 [ ipv6-address [ vpn-instance vpn-instance-name ] ] ] ] command to view statistics about NTP packets or symmetric peers.