No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to an AS

Logging In to an AS


In addition to local login through a console port, you can log in to an AS from the parent. This login mode is supported in two service configuration modes: centralized mode and independent mode.

After you log in to an AS in centralized mode, you can configure only commands related to file management and service diagnosis for fault location.

After you log in to an AS in independent mode, you can use more commands to configure services on the AS.

This section describes how to log in to an AS in centralized mode. For details about how to log in to an AS in independent mode, see Configuring an AS in Independent Mode.

For configuration commands on ASs in different configuration modes, see Service Configuration Supported on an AS.


  1. Run system-view

    The system view is displayed.

  2. Run uni-mng

    The uni-mng view is displayed.

  3. Configure an AS administrator profile and bind it to an AS.
    1. Run as-admin-profile name profile-name

      An AS administrator profile is created and the AS administrator profile view is displayed.

    2. Run user user-name password password

      An AS administrator is configured.

    3. Run quit

      Exit from the AS administrator profile view.

    4. Run as-group name group-name

      An AS group is created and the AS group view is displayed.

    5. Add ASs to the AS group.

      • Run as name as-name

        An AS with a specified name is added to the AS group.

      • Run as name-include string

        ASs of which the name contains a specified string are added to the AS group.

      • Run as all

        All ASs are added to the AS group.

    6. Run as-admin-profile profile-name

      The AS administrator profile is bound to the AS group.

    7. Run quit

      Exit from the AS group view.

  4. Run commit as { name as-name | all }

    The configuration is delivered to a specified AS or all ASs.

    After configuring service profiles and binding them to an AS, you must run this command to commit the configuration so that the configuration can be delivered to the AS.

  5. Run attach as name as-name

    Log in to an AS from the parent.

Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 83381

Downloads: 523

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next