No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Electrical Port Dormancy

Configuring Electrical Port Dormancy

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run port-auto-sleep enable

    Electrical port dormancy is enabled.

    By default, electrical port dormancy is disabled.

    NOTE:

    The electrical port dormancy function is enabled by default on the ES5D21X02T01 electrical sub-card supported by the S5720EI and the ES5D21X08T00 electrical sub-card supported by the S5730HI, and cannot be disabled.

Verifying the Configuration

  • Run the display this command in the interface view to check whether electrical port dormancy is enabled.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 37066

Downloads: 320

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next