No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Clock Source

Configuring a Clock Source

Context

To implement clock synchronization on a switch, configure a clock source first. A switch supports PTP and line clock sources. The configuration varies according to the clock source type. Follow the configuration procedure appropriate to the clock source used in your network.

Pre-configuration Tasks

Before configuring a clock source, complete the following tasks:

  • Connect devices that require synchronous Ethernet with Ethernet interfaces to establish a clock synchronization network.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 34423

Downloads: 287

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next