This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for SVF
Default Settings for SVF
Table 4-9 Default settings for SVF
Parameter
Default Setting
SVF function on the parent
Disabled
Authentication for ASs
Required
Device working mode
All modular switches work in parent mode by default, which
cannot be changed.
Among fixed switches, S5730HI work in parent mode
by default, while other switches work in AS mode by default. The working
mode of S5730HI, S6720SI, S6720S-SI, S6720EI, and S6720S-EI can be changed
using the as-mode disable command.