No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
S5710-C-LI Stack Card Stacking Support

S5710-C-LI Stack Card Stacking Support

NOTE:
  • For the cables that can be used as stack cables, see "Cables" in the Hardware Description. Using other cables may cause exceptions in the stack system, for example, frequent error-down events on stack ports.
  • The number of stacked switches is recommended to be 2 to 5.
Table 3-11  Stack card stacking support

Device Series

Stacking-supported Port Stack Cable Rate of a Single Port Remarks

S5710-C-LI

Two ports on each stack card 1 m PCIe cable 12 Gbit/s Any models of the S5710-C-LI series can set up a stack.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 49673

Downloads: 431

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next