No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Delay Time for the System to Consider a Clock Source Lost

Setting the Delay Time for the System to Consider a Clock Source Lost

Context

Setting the delay time for the system to consider a clock source lost can avoid some mistakes in determining the clock source caused by occasional signal jitter on the network.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run clock source-lost holdoff-time value

    The delay time for the system to consider a clock source lost is set.

    By default, the delay time for the system to consider a clock source lost is 1000 ms.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 34602

Downloads: 291

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next