No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the AC Output Function

Configuring the AC Output Function

Context

If PDs require AC power supply, enable the AC output function on the switch.

NOTE:

Only the S5720I-6X-PWH-SI-AC supports this function.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run set device ac-output 24v enable

    The AC output function is enabled.

    By default, the AC output function is enabled on a switch.

Verifying the Configuration

Run the display device ac-output status command to display AC output status of the switch.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 34035

Downloads: 287

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next