No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Trap Filtering

(Optional) Configuring Trap Filtering

Context

If some traps are unnecessary, configure the device not to output these traps. When the filtering function is enabled, the information center does not send the specified traps that satisfy the filtering condition to any channel. As a result, all output directions cannot receive the specified traps.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run info-center filter-id { id | bymodule-alias modname alias } &<1-50> or info-center filter-id { id | bymodule-alias modname alias } [ bytime interval | bynumber number ]

    The filtering function is configured for specified traps.

    NOTE:
    • Currently, the device can filter logs or modules with a maximum of 50 log IDs or modules. If there are more than 50 log IDs or modules, the system displays a message indicating that the filtering table is full. To configure the filtering function, run the undo info-center filter-id { id | bymodule-alias modname alias } &<1-50>, undo info-center filter-id { id | bymodule-alias modname alias } [ bytime interval | bynumber number ], or undo info-center filter-id all command to delete original IDs or modules, and reconfigure the log ID or module.

    • To add multiple IDs or modules at a time, use a space to separate IDs or modules. The system displays a message to report the result of adding each ID or module.

    • You cannot add the same ID or module repeatedly.

    • When you add an unregistered or nonexistent ID or alias name, the system displays a message indicating that the system fails to filter the trap with the specified ID or alias name.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 37278

Downloads: 327

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next