No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DHCP policy VLAN, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel, and IPv4 over IPv6 tunnel.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a DHCPv6 Client

Configuring a DHCPv6 Client

Pre-configuration Tasks

When the DHCPv6 client function is configured on the device, the device dynamically obtains IPv6 addresses and other network configuration parameters from the DHCPv6 server.

Before configuring the DHCPv6 client function, complete the following tasks:

  • Configure a DHCPv6 server.

  • Configure the DHCPv6 relay agent as service requires.

  • Configure the switch between the router and DHCPv6 relay agent or server.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065678

Views: 34560

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next