No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DHCP policy VLAN, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel, and IPv4 over IPv6 tunnel.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the DHCPv6 PD Server Configuration

Verifying the DHCPv6 PD Server Configuration

Procedure

  • Run the display dhcpv6 duid command to check the DUID of the DHCPv6 device on the network.
  • Run the display dhcpv6 pool [ pool-name [ allocated { address | prefix } | binding [ duid ] | conflict address | ipv6-address | ipv6-prefix/prefix-length ] ] command to check IPv6 address pool configurations.
  • Run the display dhcpv6 server [ database | [ statistics ] [ interface interface-type interface-number ] ] command to check information about the DHCPv6 server function.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065678

Views: 24868

Downloads: 163

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next