No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DHCP policy VLAN, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel, and IPv4 over IPv6 tunnel.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an IPv6 over IPv4 Tunnel

Configuring an IPv6 over IPv4 Tunnel

Prerequisites

Source and destination devices of an IPv6 over IPv4 tunnel must have forwarding routes.

Pre-configuration Tasks

Before configuring an IPv6 over IPv4 tunnel, complete the following tasks:

IPv6 over IPv4 Tunnel has the following three modes, the tasks are independent of each, and you can select one task according to service requirements.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065678

Views: 30198

Downloads: 226

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next