No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DHCP policy VLAN, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel, and IPv4 over IPv6 tunnel.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Optimizing IPv4 over IPv6 Tunnel Performance

(Optional) Optimizing IPv4 over IPv6 Tunnel Performance

Context

You can perform one or more of the following configurations to optimize IPv4 over IPv6 tunnel performance.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface tunnel interface-number

    The tunnel interface view is displayed.

  3. Run tunnel ipv4-ipv6 encapsulation-limit encapsulation-limit

    The maximum encapsulation count of an IPv6 packet is specified.

    By default, an IPv4-over-IPv6 packet can be encapsulated four times.

  4. Run tunnel ipv4-ipv6 flow-label label-value

    The flow label value is set.

    By default, the flow label value is 0.

  5. Run tunnel ipv4-ipv6 hop-limit hop-limit

    The hop limit of the IPv6 tunnel packets is set.

    By default, the hop limit of the IPv6 tunnel packets is 64.

  6. Run tunnel ipv4-ipv6 traffic-class { original | class-value }

    The traffic class is set.

    By default, the traffic class is 0.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065678

Views: 24802

Downloads: 162

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next