No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DHCP policy VLAN, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel, and IPv4 over IPv6 tunnel.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the IPv6 Neighbor Discovery Configuration

Verifying the IPv6 Neighbor Discovery Configuration

Procedure

  • Run the display ipv6 interface [ interface-type interface-number | brief ] command to check IPv6 information about a specified interface.
  • Run the display ipv6 neighbors [ ipv6-address | [ vid vid ] interface-type interface-number | vpn-instance vpn-instance-name ] command to check information about neighbor entries.
  • Run the display ipv6 nd track command to check information about the changes in the outbound interfaces of ND entries on VLANIF interfaces.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065678

Views: 29496

Downloads: 222

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next