No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DHCP policy VLAN, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel, and IPv4 over IPv6 tunnel.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of IPv6 over IPv4 Tunnels

Overview of IPv6 over IPv4 Tunnels

An IPv6 over IPv4 tunnel connects isolated IPv6 sites through an IPv4 network. Exhaustion of IPv4 addresses urgently requires IPv4 to IPv6 transition. IPv6 is incompatible with IPv4, so original IPv4 devices will need to be replaced. This solution is currently infeasible because replacement requires huge capital expenditures, and will interrupt services on the live network. IPv4 therefore needs a gradual transit to IPv6. During the earlier stages, IPv4 networks are widely deployed and IPv6 networks are isolated sites. An IPv6 over IPv4 tunnel allows IPv6 packets to be transmitted on an IPv4 network and connects IPv6 sites.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065678

Views: 25373

Downloads: 165

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next