No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, NETCONF, ECA, Intelligent Video O&M, eMDI, and Network Deception.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring RMON

Configuring RMON

Pre-configuration Tasks

RMON collects traffic statistics and monitors network status on the specified network segment.

Before configuring RMON, complete the following tasks:

  • Configure Ethernet interface parameters.
  • Configure basic SNMP functions.

Configuration Procedure

The RMON statistics collection and alarm can be configured in any sequence. However, if the alarm variables configured in the RMON alarm are MIB variables defined in the statistics or history group, the Ethernet or history statistics collection must be configured on the monitored Ethernet interface first. Otherwise, alarm entries cannot be created.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065680

Views: 58866

Downloads: 516

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next