No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, NETCONF, ECA, Intelligent Video O&M, eMDI, and Network Deception.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preparing for the Upgrade

Preparing for the Upgrade

Context

To ensure smooth upgrade, prepare the following before the upgrade:

Procedure

  • Check the available space of the root directory.

    Before upgrading the SA-SDB, check whether the available space of the root directory is sufficient for the upgrade, which requires at least 25 MB space.

    1. Run the dir [ /all ] [ filename | directory | /all-filesystems ] command to check the available space of the root directory.
    2. If the available space is insufficient, run the delete /unreserved [ /quiet ] { filename | devicename } [ all ] command to delete unnecessary files or run the reset recycle-bin [ filename | devicename ] command to clear unnecessary files in the recycle bin.
  • Run the display update status command to check the upgrade status of the SA-SDB.

    Ensure that the SA-SDB to be upgraded is in idle state. Otherwise, the SA-SDB upgrade will fail.

  • Run the display version sa-sdb command to check version information about the SA-SDB to be upgraded and determine whether the upgrade is needed.

    You can log in to sec.huawei.com to check and download the latest SA-SDB package.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065680

Views: 52731

Downloads: 500

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next