No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, NETCONF, ECA, Intelligent Video O&M, eMDI, and Network Deception.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of IPv4/IPv6 Flexible Flow Statistics Export

Verifying the Configuration of IPv4/IPv6 Flexible Flow Statistics Export

Context

You can run commands to verify that flexible flow statistics exporting has been configured correctly.

Procedure

  • Run the display ip netstream record { all | name record-name } command to display the configuration of a flexible flow statistics template.
  • Run the display ip netstream statistics slot slot-id command to check the NetStream statistics.
  • Run the display netstream { all | global | interface interface-type interface-number } command to check the NetStream configuration.
  • Run the display netstream cache ip record record-name [ { inbound | outbound } | destination interface interface-type interface-number | destination ip ip-address | destination port port-number | destination mac-address mac-address | source interface interface-type interface-number | source ip ip-address | source port port-number | source mac-address mac-address | protocol protocol-type | tos tos-number | ttl ttl-number | vlan vlan-id ] * slot slot-id [ verbose ] command to display details about IPv4 flexible flow statistics on the device.
  • Run the display netstream cache ipv6 record record-name [ { inbound | outbound } | destination interface interface-type interface-number | destination ipv6 ipv6-address | destination port port-number | destination mac-address mac-address | source interface interface-type interface-number | source ipv6 ipv6-address | source port port-number | source mac-address mac-address | flowlabel flowlabel | protocol protocol-type | tos tos-number | ttl ttl-number | vlan vlan-id ] * slot slot-id [ verbose ] command to display details about IPv6 flexible flow statistics on the device.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065680

Views: 59344

Downloads: 516

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next