No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, NETCONF, ECA, Intelligent Video O&M, eMDI, and Network Deception.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Enhancing Reliability of SNMP Packet Transmission

(Optional) Enhancing Reliability of SNMP Packet Transmission

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run snmp-agent packet max-size byte-count

    The maximum size of an SNMP packet that the device can receive and send is set.

    By default, the maximum size of an SNMP packet that the device can receive or send is 12000 bytes.

    After the maximum size is set, the device discards any SNMP packet that is larger than the set size. Typically, the default value is recommended.

  3. Run snmp-agent packet-priority { snmp | trap } priority-level

    The transmission level of SNMP packets is set.

    The default transmission level of SNMP packets is 6.

  4. Run snmp-agent protocol server message queue message-queue

    The size of a packet queue that can be received by an SNMP agent is set.

    By default, the packet queue that can be received by an SNMP agent contains 30 packets.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065680

Views: 53247

Downloads: 504

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next