No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, NETCONF, ECA, Intelligent Video O&M, eMDI, and Network Deception.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
KPI Information That Switches Can Send to CampusInsight

KPI Information That Switches Can Send to CampusInsight

Table 15-1  Device information
Service Parameter KPI Value
device-data Card type
  • 0: MPU
  • 1: LPU
  • 2: SFU
  • 3: CMU
  • 4: Power module
  • 5: Fan
  • 6: Card (service card or stack card)
Device index and name -
In-position status of a card
  • 0: Not in position
  • 1: In position
  • 2: Offline
Power supply status of a card
  • 0: Powered off
  • 1: Powered on
Registration status of a card
  • 0: Not registered
  • 1: Registered
Card's support for PoE
  • 0: Not supported
  • 1: Supported
PoE power supply mode of a card
  • 0: Manual
  • 1: Automatic
Total PoE supply power (mW) -
Rated power of the power module (mW) -
Real-time power of the power module (mW) -
Current of the power module (mA) -
Voltage of the power module (V) -
Information about top 3 tasks by CPU usage, including the task name, CPU usage, and CPU usage alarm threshold -
Information about top 3 tasks by memory usage, including the Handle value -
Information about the last 10 tasks that have been switched, including the task ID and task name -
Information about top 10 message queues by length, including the queue ID, name, current length, and total length -
Table 15-2  Interface status and traffic statistics
Service Parameter KPI Value
device-data Traffic statistics on an interface -
Statistics about all drop packets due to interface congestion -
Statistics about all error packets in the inbound direction of an interface -
Statistics about CRC error packets on an interface -
Duplex mode of an interface -
Working status of an interface -
Rate of an interface -
Buffer usage of an interface -
Bandwidth usage of interface -
Table 15-3  NAC user information
Service Parameter KPI Value
user-data User name -
Terminal MAC address -
Terminal IP address -
Authentication type -
Access time -
Online duration -
Access mode
  • 0: Wired access
  • 1: Wireless access
VLAN ID -
Upstream traffic statistics -
Downstream traffic statistics -
Table 15-4  PoE
Service Parameter KPI Value
poe Whether an interface supports PoE -
Whether the PoE function is enabled on an interface
  • 0: Disabled
  • 1: Enabled
Maximum PoE power configured for an interface (mW) -
Level of the PD connected to an interface -
Reference power of the PD connected to an interface (mW) -
Current power of the PD connected to an interface (mW) -
Table 15-5  Optical module
Service Parameter KPI Value
fiber-module Interface name -
Whether the optical module is certified
  • 0: Not certified
  • 1: Certified
Manufacturer -
Transmission mode

0: Single-mode

1: Multi-mode

Manufacturing date -
Bandwidth (Mbit/s) -
Serial number -
Transmission distance -
Whether DDM diagnosis is supported -
Temperature (°C) -
Upper temperature threshold (°C) -
Lower temperature threshold (°C) -
Voltage (V) -
Upper voltage threshold (V) -
Lower voltage threshold (V) -
Bias current (mA) -
Upper threshold of the bias current (mA) -
Lower threshold of the bias current (mA) -
Receive power (dBm) -
Upper warning threshold of the receive power (dBm) -
Lower warning threshold of the receive power (dBm) -
Upper alarm threshold of the receive power (dBm) -
Lower alarm threshold of the receive power (dBm) -
Transmit power (dBm) -
Upper warning threshold of the transmit power (dBm) -
Lower warning threshold of the transmit power (dBm) -
Upper alarm threshold of the transmit power (dBm) -
Lower alarm threshold of the transmit power (dBm) -
Table 15-6  Device status
Service Parameter KPI Value
device-status Record about packets dropped due to exceeding CPCAR -
Record about dropped packets in queues on interfaces -
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065680

Views: 52503

Downloads: 500

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next