No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, NETCONF, ECA, Intelligent Video O&M, eMDI, and Network Deception.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring NetStream Interface Index Length

Configuring NetStream Interface Index Length

Pre-configuration Tasks

The NetStream flow statistics exporting has been configured.

NOTE:

Only V9 supports NetStream interface index mapping.

Context

The NMS obtains interface information of exported packets according to the interface indexes in NetStream packets. Interface indexes consist of either 16 or 32 digits. NMS devices from different vendors may use different numbers of digits in interface indexes. The number of digits in the interface index used by the device must be the same as the number of digits in the interface index used by the NMS. For example, if the NMS can parse 32-digit interface indexes, set the number of digits in the interface indexes contained in exported NetStream packets to 32.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Set the number of digits in the interface index for exported packets.
    1. Run ip netstream export index-switch index-switch

      The number of digits in the interface index for exported packets carrying IPv4 flow statistics is set.

      By default, packets carrying IPv4 flow statistics have interface indexes of 16 digits.

    2. Run ipv6 netstream export index-switch index-switch

      The number of digits in the interface index for exported packets carrying IPv6 flow statistics is set.

      By default, packets carrying IPv6 flow statistics have interface indexes of 16 digits.

Verifying the Configuration

Run the display netstream { all | global | interface interface-type interface-number } command to check the NetStream configuration.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065680

Views: 52254

Downloads: 498

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next