No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Network Management and Monitoring

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, NETCONF, ECA, Intelligent Video O&M, eMDI, and Network Deception.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the RMON2 Configuration

Verifying the RMON2 Configuration


  • Run the display rmon2 protocoldirtable command to view information on the protocol directory table.
  • Run the display rmon2 hlhostcontroltable [ index ctrl-index ] [ verbose ] command to view information on the host control table.
  • Run the display rmon2 nlhosttable [ hostcontrolindex ctrl-index ] [ timemark time-value ] [ protocoldirlocalindex protocol-local-index ] [ hostaddress ip-address ] command to view information on the host table.
Updated: 2019-04-20

Document ID: EDOC1100065680

Views: 50473

Downloads: 485

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next