No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, NETCONF, ECA, Intelligent Video O&M, eMDI, and Network Deception.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Statistics About Operations Performed by the NMS

Checking Statistics About Operations Performed by the NMS

Context

This function is only supported by S5720EI, S5720HI, S5730HI, S6720EI, S6720HI, and S6720S-EI.

Procedure

  • Run the display snmp-agentstatistics mib [ [ vpn-instance vpn-instance-name ] { address ipv4-address | ipv6 ipv6-address } ] command in any view to check operation statistics.

    To disable this function for some reasons, for example, high CPU usage caused by collecting statistics about the NMS accessing MIB objects, run the snmp-agent statistics mib disable command.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065680

Views: 52053

Downloads: 496

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next