No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, NETCONF, ECA, Intelligent Video O&M, eMDI, and Network Deception.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Statistics About Operations Performed by the NMS

Clearing Statistics About Operations Performed by the NMS

Context

Operation statistics cannot be restored after they are cleared. Exercise caution when running the reset snmp-agent statistics mib command.

This function is only supported by S5720EI, S5720HI, S5730HI, S6720EI, S6720HI, and S6720S-EI.

Procedure

  • Run the reset snmp-agent statistics mib [ address ipv4-address | ipv6 ipv6-address | vpn-instance vpn-instance-name address ipv4-address ] command in the user view to clear operation statistics.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065680

Views: 51510

Downloads: 491

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next