No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, NETCONF, ECA, Intelligent Video O&M, eMDI, and Network Deception.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling NetStream Aggregation Flow Statistics Collection on an Interface

Enabling NetStream Aggregation Flow Statistics Collection on an Interface

Context

Aggregation flow statistics can be exported only when you have enabled flow statistics collection on an interface.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the interface interface-type interface-number command to enter the interface view.
  3. Run the ip netstream { inbound | outbound } command to enable the NetStream function on the interface to collect statistics about aggregation flows.

    By default, NetStream is disabled for aggregation flows.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065680

Views: 51482

Downloads: 491

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next