No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, NETCONF, ECA, Intelligent Video O&M, eMDI, and Network Deception.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring sFlow

Configuring sFlow

Pre-configuration Tasks

Before configuring sFlow, complete the following tasks:

  • Ensure that there are reachable routes between the sFlow agent and the sFlow collector.
  • Create a Virtual Private Network (VPN) instance if the sFlow agent is located on a private network.

Configuration Procedure

Mandatory steps for configuring sFlow:

  • Configure sFlow agent and collector information.
  • Configure sFlow sampling mode.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065680

Views: 59332

Downloads: 516

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next