No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Network Management and Monitoring

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, NETCONF, ECA, Intelligent Video O&M, eMDI, and Network Deception.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Intelligent Video O&M

Overview of Intelligent Video O&M


To implement intelligent video operations and maintenance (O&M), enable a switch to periodically send performance data to CampusInsight, including interface traffic statistics, CPU or memory data, optical module information, and monitoring information about audio and video streams. CampusInsight processes received performance data, analyzes fault causes, and provides troubleshooting suggestions. It also completes health status check for the network, applications, and services, as well as implements fault pre-processing.

An intelligent video O&M system consists of the CampusInsight, Agile Controller-Campus, and switches. In the intelligent video O&M solution, switches can be deployed independently or through the Agile Controller-Campus.

Intelligent video O&M can be used in the O&M management design of the Agile Campus Solution and Cloud Managed Solution.


As networks expand in scale and support a growing number of services, users have higher requirements on network O&M. For this reason, O&M personnel need to find a way to quickly locate networks faults once they occur.

Traditional network key performance indicators (KPIs) can reflect changes to the quality of network services, but cannot directly represent specific service experience changes let alone allow uses to determine network quality. O&M personnel often find that network KPIs are good but user experience is poor. However, traditional manual O&M methods are unable to address such issues. Intelligent video O&M allows CampusInsight to measure real user experience using quantitative KPIs and use them as monitoring indicators to generate alarms in a timely manner. In this way, CampusInsight can pre-process faults before they are perceived by users, improving user satisfaction and reducing the network operating expense (OPEX).

Updated: 2019-04-20

Document ID: EDOC1100065680

Views: 59680

Downloads: 516

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next