No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, NETCONF, ECA, Intelligent Video O&M, eMDI, and Network Deception.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for Service Diagnosis

Licensing Requirements and Limitations for Service Diagnosis

Involved Network Elements

Other network elements are not required.

Licensing Requirements

Service diagnosis is a basic feature of a switch and is not under license control.

Version Requirements

Table 7-2  Products and versions supporting service diagnosis

Product

Product Model

Software Version

S2700

S2700SI

Not supported

S2700EI

Not supported

S2710SI

Not supported

S2720EI

V200R006C10, V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

S2750EI

V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S3700

S3700SI

Not supported

S3700EI

Not supported

S3700HI

Not supported

S5700

S5700LI

V200R003(C00&C02&C10), V200R005C00SPC300, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S5700S-LI

V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S5710-C-LI

Not supported

S5710-X-LI

V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00

S5700SI

V200R003C00, V200R005C00

S5700EI

V200R003C00, V200R005(C00&C01&C02&C03)

S5710EI

V200R003C00, V200R005(C00&C02)

S5720EI

V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00, V200R013C00

S5720LI, S5720S-LI

V200R010C00, V200R011C00, V200R011C10, V200R012(C00&C20), V200R013C00

S5720SI, S5720S-SI

V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00, V200R013C00

S5720I-SI

V200R012C00, V200R013C00

S5730SI

V200R011C10, V200R012C00, V200R013C00

S5730S-EI

V200R011C10, V200R012C00, V200R013C00

S5700HI

V200R003C00, V200R005(C00SPC500&C01&C02)

S5710HI

V200R003C00, V200R005(C00&C02&C03)

S5720HI

V200R006C00, V200R007(C00&C10), V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00, V200R013C00

S5730HI

V200R012C00, V200R013C00

S6700

S6700EI

V200R003C00, V200R005(C00&C01&C02)

S6720LI, S6720S-LI

V200R011C00, V200R011C10, V200R012C00, V200R013C00

S6720SI, S6720S-SI

V200R011C00, V200R011C10, V200R012C00, V200R013C00

S6720EI

V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00, V200R013C00

S6720S-EI

V200R009C00, V200R010C00, V200R011C00, V200R011C10, V200R012C00, V200R013C00

S6720HI

V200R012C00, V200R013C00

NOTE:
For details about software mappings, visit Hardware Query Tool and search for the desired product model.

Feature Limitations

  • Service diagnosis affects system performance. Therefore, enable service diagnosis only when fault locating is required. After locating faults, immediately run the undo trace enable command to disable service diagnosis.
  • Users with different services have different attributes. Create diagnosis objects for different services based on different attributes.
    • DHCP service: based on the MAC address.
    • AAA and NAC services: based on the MAC address, IP address, user name, user VLAN ID, access mode, or interface number.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065680

Views: 57409

Downloads: 514

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next