No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, NETCONF, ECA, Intelligent Video O&M, eMDI, and Network Deception.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Basic LLDP Function Configuration

Verifying the Basic LLDP Function Configuration

Procedure

  • Run the display lldp local [ interface interface-type interface-number ] command to view LLDP local information on a specified interface or all interfaces.
  • Run the display lldp neighbor [ interface interface-type interface-number ] command to view neighbor information in the system or on an interface.
  • Run the display lldp neighbor brief command to view brief information about neighbors.
  • Run the display lldp tlv-config [ interface interface-type interface-number ] command to view TLV types supported by the entire system or an interface.
  • Run the display cdp local [ interface interface-type interface-number ] command to view CDP status in the system or on an interface.
  • Run the display cdp neighbor [ interface interface-type interface-number ] command to view CDP neighbor status in the system or on an interface.
  • Run the display cdp neighbor brief command to view brief information about CDP neighbors.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065680

Views: 59273

Downloads: 516

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next