No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, NETCONF, ECA, Intelligent Video O&M, eMDI, and Network Deception.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logs and Alarms that Can Be Reported by Switches to CampusInsight

Logs and Alarms that Can Be Reported by Switches to CampusInsight

Table 15-7  Logs
Module Log
POE POE/6/PDCONNECT
POE/6/PDDISCONNECT
POE/6/PDPOWEROFF
POE/6/POWERSUCCESS
POE/3/POWERFAIL
POE/3/PORTERROR
POE/4/PORTPDOVERLD
POE/4/NONSTANDARDPD
POE/3/CARDABSENT
POE/4/POEPWABSENT
POE/4/POEPWABSENTRESUME
POE/4/PWRUTITHRESH
DHCP DHCP/6/SNP_RCV_MSG
NOTE:

By default, the switch does not print the log. If you want to print the log, run the dhcp snooping packet-flow log enable command to enable the function of recording logs when DHCP packets are exchanged.

CM CM/5/USER_ACCESSRESULT
CM/5/USER_OFFLINERESULT
SEA SEA/4/SIP_ABNORMAL_OFFLINE
SEA/3/SIP_ACL_FAIL
SEA/3/SIP_ACL_FAIL
SEA/6/SIP_CREATE
SEA/6/SIP_END
SEA/4/SIP_INVITE_FAIL
SEA/4/SIP_RES_FULL
SEA/4/SIP_RES_FULL
Table 15-8  Alarms
Module Alarm
ACLE ACLE_1.3.6.1.4.1.2011.5.1.2.2.1.1.4.2 hwAclResThresholdExceedTrap
ACLE_1.3.6.1.4.1.2011.5.1.2.2.1.1.4.4 hwAclResTotalCountExceedTrap
L3MB L3MB_1.3.6.1.4.1.2011.5.25.227.2.1.55 hwBoardL3ResFull
L2IFPPI L2IFPPI_1.3.6.1.4.1.2011.5.25.315.3.3 hwSlotMacUsageRaisingThreshold
L2IFPPI_1.3.6.1.4.1.2011.5.25.315.3.4 hwSlotMacUsageFallingThreshold
IFNET IFNET_1.3.6.1.6.3.1.1.5.3 linkDown
IFNET_1.3.6.1.6.3.1.1.5.4 linkUp
IFPDT IFPDT_1.3.6.1.4.1.2011.5.25.157.2.219 hwInputRateChangeOverThresholdNotice
IFPDT_1.3.6.1.4.1.2011.5.25.157.2.220 hwOutputRateChangeOverThresholdNotice
MCAST MCAST_1.3.6.1.4.1.2011.5.25.227.2.1.53 hwBoardMcResFull
MPLS MPLS_1.3.6.1.4.1.2011.5.25.227.2.1.54 hwBoardMplsFwdResFull
POE POE_1.3.6.1.4.1.2011.5.25.195.40.8 hwPoePdConnected
POE_1.3.6.1.4.1.2011.5.25.195.40.9 hwPoePdDisconnected
POE_1.3.6.1.4.1.2011.5.25.195.40.10 hwPoePdClassInvalid
POE_1.3.6.1.4.1.2011.5.25.195.40.11 hwPoePdClassOvercurrent
POE_1.3.6.1.4.1.2011.5.25.195.40.2 hwPoePowerOff
POE_1.3.6.1.4.1.2011.5.25.195.40.3 hwPoePowerOn
POE_1.3.6.1.4.1.2011.5.25.195.40.16 hwPoePdPriorityDifferent
POE_1.3.6.1.4.1.2011.5.25.195.40.17 hwPoePowerOverUtilizationThreshold
POE_1.3.6.1.4.1.2011.5.25.195.40.18 hwPoePowerOverUtilizationThresholdResume
POE_1.3.6.1.4.1.2011.5.25.195.40.20 hwPoePowerAbsent
POE_1.3.6.1.4.1.2011.5.25.195.40.21 hwPoePowerAbsentResume
POE_1.3.6.1.4.1.2011.5.25.195.40.32 hwPoeCardAbsent
POE_1.3.6.1.4.1.2011.5.25.195.40.33 hwPoePortFail
POE_1.3.6.1.4.1.2011.5.25.195.40.34 hwPoePortFailResume
SRM SRM_1.3.6.1.4.1.2011.5.25.129.2.17.1 hwOpticalPowerAbnormal
SRM_1.3.6.1.4.1.2011.5.25.129.2.17.2 hwOpticalPowerResume 67694-67697
ENTITYTRAP ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.2.3 hwBoardFail
ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.2.4 hwBoardFailResume
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065680

Views: 53365

Downloads: 504

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next